Gently ease your flathead screwdriver under the green ribbon on the left of the consoles front and pry.There are quite a few solutions to this problem and you never know which one might be suitable for your situation.
Xbox 360 Drive Won T Open Install Any NewIf the Xbox 360 is not able to read discs, you are not able to install any new games or even play a game if it requires the disc to be inserted.Follow the solutions presented below to get rid of the Open Tray error once and for all.
Solution 1: Dismantle Your Xbox and Leave it Like That For a While Even though this solution seems like something that wouldnt work for a majority of cases, the solution has helped some people get rid of the error. There are several reasons why this method may produce outstanding results and its definitely something you should try at the beginning, before starting any advanced methods. Press and hold the power button at the front of the Xbox 360 console until it shuts down completely. Press and hold the power button on the Xbox several times to make sure there is no remaining power in the console itself. Plugin the power brick and wait for the light located on the power brick to change its color from white to orange. Xbox 360 Drive Won T Open Code Keeps OnTurn the Xbox back on as you would do normally and check to see if the Open Tray error code keeps on appearing on it. Solution 2: Turning Certain Parts to Their Proper Place It seems that there is a certain square part located in your Xbox 360 that gets moved out of place during certain activities. Plenty of users confirmed that getting these parts back to their place managed to fix their issue entirely but know that you will need to be extra careful since you will need to open your Xbox 360 entirely to get access to them. Xbox 360 Drive Won T Open Free Of AnyYour console should be completely free of any wires or attachments, including external storage you may own, HDMI cables, charging cable and the controllers. If there is a disk in the console, make sure you eject it and place it somewhere else before proceeding. Pry off the faceplate by inserting your finger into the USB port section, which is located to the right of the power button, and pulling the faceplate toward you. You can be relatively firm while doing thisthe Xbox 360 doesnt have fragile parts behind the faceplate like later models do. Release the end grilles by poking a large, bent paperclip through the holes in the top row of ventilation spaces on the Xbox 360s casing, prying up each time. Insert a flathead screwdriver into space where the grille connects with the console case, then work the screwdriver around, prying up as you go. If you have a hard drive on your Xbox 360, first remove it before removing the end grills by simply pulling them away from the Xbox 360 case. Unclip the front of the case which is held by four clips on the front side of your console by simply pulling its top towards yourself. Unclip the back of the Xboxs case and place your hand inside the space on the right where the grille used to be and apply pressure to the connected halves of the casing while inserting the flathead screwdriver into the slots on the back. Use your Torx screwdriver for this; if you see a screw that wont fit your screwdriver, dont try to unscrew itit isnt necessary for disassembly. ![]() Remove the eject button located on the left side of the consoles front part.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |